Bucket mould, paint bucket mould, pail mould
We are the bucket mould maker, and we can manufacture many bucket mould and we can promise our quality. And I think we are good mold maker, because we have professional technical team and precision equipment.
When we think about the bucket mould, especially the paint bucket, the first thing we will worry about the thickness of the bucket, is it same or not. This problem is very common, so, when making the bucket mold, this is what we solve first. To solve this problem, I think we should know what cause this. The first reason for this is the cooling water in the bucket mold flowing is uneven, so, it will make the hot flow is quickly and the low temperature will flow slowly. Then, the thickness of the bucket is different.
And about the paint bucket, we not only consider about the thickness, but also the ejector pin. Because as we know, during the edge of the bucket, there is a undercut, so, we should let the undercut out before fall. And if there is any other undercut, so we need the cam.
Those problems are not difficult for our factory. So, if you need more information about the technology about the bucket mould to be solved, I hope you can contact with me.