crate mould, spare parts box mould, tool box mould
There are many kinds of crate mold, for example milk crate, fruit crate, fish crate and so on.
And about the crate mold, there are 3 points need to solve:
1. How to make the mold life become longer? Because some companies will use re-used plastic to produce the crate mold, so the tiny iron particles and stones will scratch the core and cavity. Then is the steel. If we want to produce 4 products in one crate mold, we should use the steel and the hardness is more than 33. This is what we can conclude with our experience.
2. Does the crate mold need high speed or not?
Of course the answer is yes. Because if you want to use crate longer, I think you will use the HDPE with MFR is low. So, we need high speed.
3. The exhaust systems of crate mold handle.
It must be good. When the crate is overweight, the handle of two sides is very important, because in this time, the handle of crate mold will become stress points. If the exhaust system is not good, the crate will leave weld seam, then the crate will be easily damaged from this.
Please feel free to contact us when you need any crate mold solutions.