There are many types of plastic molds, how are they classified? (1) Injection molding is to add plastic to the heating barrel of the injection machine. The plastic is heated and melted. Driven by the screw or plunger of the injection machine, it enters

​Patterning is a relatively common process in injection molds. Patterning is actually a common process in the surface treatment of injection molds, which will directly affect the appearance and surface strength of the product surface. Mold patterning is also ...

The injection mold needs to go through large and small processes from the beginning of the order to the final trial and sample delivery, such as: CNC processing, heat treatment, EDM processing, wire cutting and so on. So today we are going to talk

In the injection mold processing process, there are so many fixed processes that need to be used, including CNC machining, EDM machining, etc., so today we will talk about what EDM machines are like and what they do. EDM for short, EDM is a kind of m...

The requirements for PMMA injection molds are relatively high, and the surface should be high-gloss and there can be no process defects, but PMMA products are generally thicker, so there are often trapped air and product bubbles in the injection mold.

​We specialize in the development and manufacture of a full range of bottle cap moulds, such as anti-theft bottle cap moulds, flip cap moulds, bow-tie bottle cap moulds, water bottle cap moulds, shampoo bottle cap moulds, etc. We have more than 10 years of pl...

With the development of the times, the progress of science and the continuous updating of multimedia technology, the traditional CRT in the TV industry is gradually eliminated, replaced by LCD and LED TVs with novel appearance, ultra-thin volume

In the process of plastic injection molding, temperature control is extremely important. It will not only affect the quality of the product but also the molding cycle. Different plastics have different fluidity, so their temperature control is also different. ...